Instant Water Heater Tankless

Hot water in seconds – right where you need it

This compact electric tankless water heater warms water as it flows through, so you get hot water at the sink in about 5 seconds instead of waiting for it to travel from a distant tank. It mounts on the wall in tight spots like under a kitchen or bathroom sink, and a blue LED display shows the water temperature at a glance.

Why You'll Love It

• Hot water in about 5 seconds – starts heating automatically as soon as water flows, no storage tank to heat up.
• Adjustable 68–122 °F – set a gentle warm for washing hands or hotter water for dishes with the touch button.
• LED temperature display – a clear blue digital screen shows the real-time water temperature.
• Built-in protection – leakage, grounding and dry-heating protection plus an IPX4 splash-resistant housing.
• Compact wall-mount design – about 4.6 × 2.8 × 6.3 in, fits under sinks and in small utility spaces.
• Less standby energy loss – it heats only the water you use, when you use it.

Important Safety Information

• Have the unit installed by a qualified person (licensed electrician/plumber) following the manufacturer's instructions and local codes.
• This is a 110 V, 3000 W appliance: connect it only to a grounded, GFCI-protected outlet on a circuit rated for its load – ask an electrician to confirm your circuit before use.
• Mount it vertically only (never horizontally) and let cold water run through the unit before plugging it in for the first time, to avoid dry heating.
• Keep the unit, plug and outlet away from direct water spray and never touch the plug with wet hands.

Specifications

• Type: electric tankless (point-of-use) water heater
• Voltage: 110 V, 50/60 Hz
• Power: 3000 W
• Temperature range: 68–122 °F
• Water pressure: approx. 6–174 PSI
• Heating time: approx. 5 seconds
• Dimensions: 4.6 × 2.8 × 6.3 in
• Weight: 2.2 lb
• Power cord: 3.3 ft with 3-prong grounded plug
• Connections: 1/2-inch threaded brass inlet and outlet
• Splash resistance: IPX4
• Display: blue LED temperature display with touch power button
• Mounting: wall-mounted, vertical installation only
• Safety features: leakage, grounding and dry-heating protection
• In the box: 1 × instant water heater, 1 × user manual (English), wall anchors and screws

FAQ

How fast does it heat water? Warm water arrives within about 5 seconds after the water starts flowing.

Can I adjust the temperature? Yes, from 68 °F to 122 °F using the touch button and the LED display. Lower flow gives warmer water; higher flow gives cooler water.

Do I need a professional to install it? Yes, we recommend installation by a qualified electrician/plumber. The unit draws 3000 W, so the outlet must be grounded, GFCI-protected and on a circuit that can handle the load.

What fittings does it need? It uses standard 1/2-inch threaded water connections.